JDC1 Strobe


JDC1 Hybrid Strobe

When you look for a strobe, you look for power and the award winning JDC1 from GLP delivers power in excess. Through a versatile and highly creative design, the likes of which has never been seen before.

The JDC1 contains a traditional single tube element created with LED’s that produce an incredible clear, bright white output. This is then combined with a surrounding full face of RGB power, utilizing a large array of complimentary LED sources. The possibilities are endless as these two elements have independent control and can be used as separate pieces. Or combined for stunning effects.

Along with working as a powerful strobe light, both the tube and the full face sections can be run continuously for high output blinder and wash light effects. These will never reduce output or have thermal cutouts.

To give even more functionality, the RGB face which can be divided into 12 separate ‘pixel’ sections. Additionally the bright white tube also can be divided into 12 sections and then the whole array can be fully pixel mapped through any standard controller.

The JDC1 also features dynamic movement with a 16 bit, 185° tilt range, allowing you to place effects exactly where and when you want them to be. While also getting the best possible power and impact.

The JDC1 is a whole new class of strobe that offers an incomparable feature set. Going way beyond the definition of a hybrid.


The JDC1 is hybrid redefined.


Contact us for more on the JDC1

Summary of main features

Light source

  • Dual Mode – High power white tube LED’s surrounded by RGB plates


  • 185° Tilt range
  • 16 bit resolution motorized tilt
  • Position feedback
  • High precision 3 Phase stepping motor control

Strobe Control

  • Separate control of intensity, rate and duration for tube and plate elements
  • 6 pixels per plate section (12 total) can be individually controlled with color and intensity
  • Center tube can be programmed in 12 pixel sections
  • Macro channel with Pulse and Random effects


  • DMX-512 protocol
  • Pixel mapping control
  • Back-lit graphic-LCD menu
  • Battery operation of menu
  • Over-temperature protection

Light Source
 Strobe Panels

  • 1320 RGB LED’s across two panels
  • Programmable into 12 pixel sections (2 x 6)

Strobe Tube

  • 216 x White LED
  • Programmable into 12 pixel sections


  • Resolution: 16 Bit
  • Position Feedback: yes
  • Tilt (Degrees): 185°


  • Display        
    • Illuminated graphic LCD
    • Self-charging buffer battery
  • Protocol        
    • DMX-512
  • Cooling
    • Temperature controlled
    • Overheating protection

Power Supply

  • Mains voltage: 100-240 VAC / 50-60Hz
  • Power (Watt @ 230V): 1200 Watt
  • Fuse: 6.3 mm X 32 mm T15A


  • DMX Data
    • XLR 5-pin in/out
  • Mains Power
    • Neutrik TRUE1 Input

Operating Conditions

  • Maximum ambient temperature: 104°F  (40°C)

Mounting Options

  • Omega bracket attachments mount directly to rear of fixture
  • Attachment points for safety wire
  • Built in rubber feet for floor mounting
  • Any orientation


  • Cardboard box
  • 8 Way or 4 Way Flight cased options available

Housing Colors

  • Standard color: black
  • Optional: Special colors on request


  • (L x W x H): head vertical
    • 15.3” x 6.1” x 11.2”  (39 cm x 15.4 cm x 28.4 cm)


  • Weight (inc. bracket): 26.5 lbs.  (12 kg)
  • Weight (without bracket) 24 lbs.  (10.8 kg)



PDFIcon JDC1 User Manual EN v3.0 SW1.70-68-18

PDFIcon JDC1_DMXLayout_SW1.70-68-18

PDFIcon JDC1 Aggressive Mode Explained


ZIPIcon JDC1 vectorworks symbol 2017


PDFIconPDF JDC Dimensions


PDFIcon JDC1 PDF Data Card


PDFIcon PDF JDC1 photometrics

ZIPIconJDC1 Photometrics